Skip to main content
English Français

1-877-967-2726

Tag: Experiments

The Reason for Seasons

Students often have the misconception that the distance from the sun is the main factor for the change in season. If that were the case, then the Northern and Southern Hemispheres would have the same seasons at the same time of the year, when in fact they are opposite.

Enlighten your students by modeling the movement of the Earth with some simple items. The setup pictured below includes a lamp to model the sun, a globe, a Wireless Light Sensor adhered to the globe with Velcro, and a meter stick to address those pesky misconceptions.

1

First we can look at the January in the Norther Hemisphere. Students should note the latitude and measure the light intensity using SPARKvue.

2

Then adhere the Wireless Light Sensor to the Southern Hemisphere at the same latitude as before, but well below the equator to measure the light intensity there.

3

The “brighter” students in the class will notice that tilt of the Earth has greatly affected the angle of the sensor relative to the lamp. Does the angle of incidence also affect the intensity of the light? The debate may be intense, but let students create a hypothesis before they collect data, then check the data to find out!

4

With the Earth is at this angle, there is a lot more light coming into the Southern Hemisphere. The amount of light that hits the an area on surface of the Earth is called insolation. The tilt of the Earth affects the solar insolation which is the reason we need insulation for the winter in the norther hemisphere while the Southern Hemisphere experiences summer. For students who assumed the seasons were based on the distance from the sun, this is truly a light bulb moment!

What is happening when the Earth is half-way around its orbit? No need to wait six months, we can fast forward to July simply by moving the globe to the other side of the lamp. Use the meter stick to make sure the globe is equidistant from the “sun” and affix the Wireless Light Sensor to the Northern Hemisphere.

5

The tit of the Earth hasn’t changed, but now the Northern Hemisphere is pointing more directly toward the lamp. Next we can move the sensor to the southern hemisphere to see if it is still as dazzling as before.

6

We can illuminate the effect by once again checking the data.

7

The light intensities have flipped from the previous run as the angle of incidence has changed. Now the Northern Hemisphere basks in the sun, while the Southern Hemisphere needs some insulation due to a lack of insolation.

Using SPARKvue software we can get a year in review by comparing the data.

8

Throughout this brilliant activity, student should see that the amount of light hitting the Earth’s surface at different parts of the year is based on the tilt of the Earth about its axis, not the distance from the sun. Hopefully, this activity has shed some light on the true reason for the seasons.

Concentrate on the Conductivity

Students have a hard time concentrating when the topic is solution concentration. The solution may be having them create their own solutions.

Using some solid solutes and glassware, have them make a solution with a specific molarity. They should write down their own steps and follow their procedure. Make sure they are specific with the type of glassware and the quantities of solute and solvent. This is a good way for them to review items or steps that they may have forgotten and to put theory into practice.

Have them make two solutions of the same molarity: one from an ionic solute and the other from a covalent solute. After revising their procedure and correctly massing their solutes, you can take stock of their work, while they create stock solutions. Add a splash of food coloring to each solution to help them distinguish between the two. There is a good pedagogical reason, and an added bonus that a dash of color makes any activity more festive!

After making up their stock solutions from the solid solutes, they can concentrate on the concentration even more by making dilute solutions. They should create a series of dilutions that are the same volume. Before they start pouring, make sure they understand mole and volume relationships by have them write out their calculations and procedures.

Those drops of food dye will really come in handy as they prepare the solutions because they’ll serve as a visual check on the concentration! They can see that the solution is getting more dilute, and you can quickly see if they are on the right track.

Now it’s time to kick this solution investigation up a notch. They can measure the conductivity of the solutions using SPARKvue and the Wireless Conductivity Sensor.

3

First have them test the solutions with the ionic compound solute. As they collect the data, they should plot Conductivity vs. Concentration.

4

There are a couple of key concepts that they can quickly discern from this graph. The solutions containing the ionic compound are definitely electrolytic (they conduct electricity), and the conductivity is directly related to the concentration.

What happens with the covalent compound solutions? Will they see the same relationship?

5

There is a straight line on the graph for the covalent compound— it just happens to be flat and approximately zero for all the concentrations!  Even though they could see from the dyes that the solutions were different, the conductivity did not change. But why? These solutions are non-electrolytic. No matter how high or low the concentration, the conductivity will not be affected.

Through this activity, students get to concentrate on concentration by making and testing their own solutions. The food coloring and the Wireless Conductivity Sensor provide visual cues and quantitative data as the students construct their own cognitive concentration concepts (say that five times fast). Even a measurement of zero can be important because, in this case, it can drive home the important difference between electrolytes and non-electrolytes.

Under Pressure – Wireless sensor inside a balloon!

When introducing pressure and gas laws, I have always used balloons as a conceptual starting point because they are a familiar item to students. Unfortunately, I could not easily measure the actual pressure inside of the balloon— until now. The Wireless Pressure sensor make this possible and very easy.  Pretty amazing right?  What’s next, life on mars?

pb1

Even for those that are absolute beginners to pressure studies, this is a fun experiment, one that’s sure to garner you great fame among your students. Using a slightly larger balloon, and a little patience, the students who are able to get the pressure sensor into the balloon will definitely be heroes (if just for one day)

Now, with the sensor secured inside the balloon, let’s dance— or at least begin the experiment. Turn the sensor on and connect it to your device so your students can commence a countdown and start collecting data while they inflate the balloon!

pb2

The analysis tools in SPARKvue, allow the students to observe the pressure ch-ch-changes over time.

pb3

Some things to initially note could be the slight increase in pressure as the balloon is inflated, the changes in pressure as the balloon is compressed and the sharp decrease in pressure as when the balloon is popped. It’s a fantastic voyage through the many phases of the pressure change.  Seeing data displayed in real time helps connect the science behind the sound and vision of a balloon popping.

Now that they have been engaged by the activities and explored the data (and before they start to act like a rebel, rebel) try having the students explain and elaborate on what is happening and why.

With this activity only taking a few minutes to complete it can be used as a demo, as a quick investigation or it can be grouped with a few other basic investigations where students move station to station to learn about gases. And as students begin to construct their knowledge about gas properties using familiar items, you can incorporate the empirical gas laws leading up to the ideal gas law.

To make this a truly memorable lesson, you and your students should be listening to “Under Pressure” by Queen and David Bowie while performing the activity.   All the young dudes (and dudettes) will enjoy this one.

 

Popsicle Phase Change

Phase changes are an important part of chemistry and physical science curriculum — and Freeze Pops are an important part of everyone’s summer. What better way to take the edge off the summer heat than combining the two to make a cool activity that addresses changing states of matter?

In the science lab, temperature measurements will help crystalize students’ thoughts around freezing and connect the phase change with particle motion.

asset_upload_file986_192113

To set up this cool experiment, you’ll need to get a base line temperature change of pure water as well as the temperature change of the Freeze Pop. First, pour some water into a plastic container and add a Wireless Temperature Sensor. Next, we’ll open two Freeze Pops (that haven’t been frozen), pour the contents into another plastic container and add a second Wireless Temperature Sensor. Now you can use SPARKvue’s remote logging capabilities and put everything in the freezer. And if you really want to sweeten the inquiry, add some additional Freeze Pops as a tasty post-experiment treat!

The Wireless Temperature Sensor can remotely log data for days, but we’ll only needed a few hours. After letting the samples set overnight, it was time to check the results.

asset_upload_file155_192113

The samples look frozen. Let’s check SPARKvue to see if the data is just as solid.

asset_upload_file928_192113

I started by checking out the water. No brain freeze here— that’s just cool data.

The students will notice that the temperature dropped to 0oC, and stayed there before dropping again to the temperature of the freezer. But what’s so special about 0oC and why the plateau?

The students may know that this is the freezing point of water. But they may not realize that the water sample can’t get below the freezing point until the entire sample is frozen. This is where particle illustrations become important.

asset_upload_file289_192113

As the water molecules cool, they slow down into a regularly repeating pattern forming a solid. But why the plateau? As long as there are some faster, freely-moving water molecules in the sample, there will be an equilibrium between the liquid water and the ice keeping the temperature constant. Once all of the water molecules are moving slow enough to be frozen and in the solid state, then the temperature can begin to drop again.

asset_upload_file797_192113

Is the same thing happening with the Freeze Pop? It’s a good thing we have hours worth of data to find out!

This sample, which is not pure water, froze at a temperature that is lower than zero. The freezing point is depressed— but you shouldn’t be. This always happens with a solution. The other particles in the sample (sugar and dyes mostly) get in the way of the solid-liquid water equilibrium and lower the Freeze Pop freezing point.

Students may also note that there is not a flat plateau during freezing. As the water freezes out, the sample gets more concentrated with the “other” particles, depressing the freezing point even more. The freezing slope isn’t steep enough for sledding, but it is definitely noticeable. Once the entire sample is frozen, the temperature decrease is more dramatic.

The concept of freezing point depression is important and it has real practical applications— from making Freeze Pops and ice cream, to car antifreeze and melting ice in the winter.

Now your students can not only understand freezing, but they can explore factors that would affect freezing point depression. I am sure this would open up the lab to 31 flavors of ice cream inquiry!

Temperature misconceptions? Shake it off.

Most students understand that things get warmer as temperature goes up, but it is in the science lab that we have an opportunity to really help them understand what temperature means. One of the core ideas in Physical Science is that temperature is actually a measure of the kinetic energy of the particles of the matter. But when you’ve only thought about temperature as being hot or cold, this is an especially difficult concept because the “particles of matter” are hard to visualize.

One way to bring this concept into focus is to model the sub-microscopic world with something that the students can physically manipulate. We’ll shake things up in the lab by  modeling molecules with some craft beads.

Temperature

To measure the temperature, I used a Wireless Temperature Sensor and SPARKvue software. After placing sensor into an empty jar with the beads, I just needed to add some energy. Next step… just shake that jar thing. With a wireless sensor this is easy—just put the lid on and shake it up

Temperature Graph

I imagine that an entire class of student shaking these beads could be quite a cacophony. These engaged students would definitely see (and hear) the motion of the particles inside their sample of matter. You may need to reign them in a bit and remind them that they should “shake it, don’t break it.”

We know the dancing around turned up the heat in your class, but did all of this movement affect the temperature in the jar? Let’s take a closer look at the data.

One way to bring this concept into focus is to model the sub-microscopic world with something that the students can physically manipulate. We’ll shake things up in the lab by  modeling molecules with some craft beads.

They say fakers gonna fake, fake, fake, fake, fake, but the data doesn’t lie. While the temperature increase was small, we can clearly see that the sensor did measure a steady increase in the temperature.

Now that they have the basic idea of temperature, you can have the students tune their own own investigation to determine the relationships among the energy transferred, the type of matter, the mass, and the change in the average kinetic energy of the particles as measured by the temperature of the sample.

While the students are devising plans (and of course competing to see who can change the temperature the most), you can rest assured that they are understanding disciplinary core ideas and incorporating engineering practices and cross cutting concepts.

Durham DSB – PASCO PD Session

Professional Development is a career-long endeavor and AYVA Educational is always happy to help. Quentin Dus and Jason Peng represented PASCO Scientific at the Durham District School Board on Friday October 7. The two hosted several information sessions to help teachers at the board familiarize themselves with PASCO’s newest wireless sensors. The sessions also engaged teachers with demonstrations and hands-on experience where teachers had a chance to perform the Ice and Road Salt Experiment using PASCO’s Wireless Temperature Sensor and SparkVue software.

Quentin and Jason also demonstrated the Smart Cart and performed the Alka-Seltzer in Fruit Juice Experiment with the PASCO Wireless pH and Temperature sensors. As always, the teachers successfully predicted the results for pH and temperature changes (we even tried throwing them a curve-ball with this endothermic reaction!). Among the most engaging demonstrations was a simple pressure activity where we had volunteers capture as much air as possible in a clear garbage bag. Then, the volunteers squeezed the bag and we were able to visualize the pressure change using the PASCO Wireless Pressure Sensor and SparkVue software. This simple activity is a fun example of thinking outside the box to implement some creative ways to take advantage of PASCO’s wireless sensors.

We would like to thank Beth at Pickering High School for organizing the successful event! It was a pleasure to meet all the teachers.

Durham training2016

The first week of the Nova Scotia Training road show was a great success!

Facilitated by veteran PASCO trainer Glenn Starkey, the grade 4 to 6 teachers – representing over 20 schools per session – had an engaging time investigating temperature changes in water and reflective properties of light, as well as learning how to collect measurements with their own weather station. Helping to support Glenn at each session were Craig Ecclestone from AYVA Educational Solutions, and Eric Therrien and Christine Christensen from the Nova Scotia Department of Education.

Over the course of the week, eight separate 3-hour hands-on training sessions were conducted, with representatives from nearly half of the elementary schools across the province. The training was based on the Airlink, the general science sensor and the weather anemometer. The post training feedback was overwhelmingly positive with many teachers commenting that it was the best professional development they ever had to promote scientific inquiry.

Teachers at the Strait regional district school board were surprised and intrigued to discover that contrary to their predictions, a standing cup of water will almost always be lower than the surrounding air.
Teachers at the Strait Regional District School Board were surprised and intrigued to discover that contrary to their predictions, the temperature of a standing cup of water will almost always be lower than the surrounding air.
Reaching towards the ceiling a participant at the Halifax regional district school board investigates variations in light levels throughout the room.
Reaching towards the ceiling, a participant at the Halifax Regional District School Board investigates variations in light levels throughout the room.
With Glenn Starkey at the front of the class a teacher at the Strait regional district school board contemplates the effect of a drop of water on the probe's measurement of temperature.
With Glenn Starkey at the front of the class, a teacher at the Strait Regional District School Board contemplates the effect of a drop of water on the probe’s measurement of temperature.

PASCO Wireless Sensors & SPARKVue – Changing the Way Teachers Teach Science

Capture“For science teachers who are looking to change their classroom practices and give their students more hands on experience, you need to consider using the latest wireless temperature sensors from PASCO. Using the PASCO Wireless Sensor technology will change the way you teach ….”

Read the entire review blog by Brian Friedlander from Assistive Tek LLC here: http://assistivetek.blogspot.com/2016/06/pasco-scientific-wireless-sensors.html

Head in the Clouds – The Study of Thermoclines

Try these experiments for those who already have their ‘head in the clouds’.

Cloud_Formation_Atmospheric_Properties_Chamber

Cloud Formation

Study Cloud Formation in your lab using PASCO’s Atmospheric Properties Chamber. Be sure and watch the video to learn more!

 

Modeling_thermoclines_Density_circulation_Model

Modeling Thermoclines

PASCO’s Density Circulation Model is a great way to model thermoclines and circulation in the classroom. Watch the video and learn more!

Breathe Some Life into Physiology with Spirometer Experiments

 

Breathe some life into Physiology- Spirometer (PS_2152)575x100

The Spirometer Sensor is a great way to get students interested in respiration and lung volume— and it can be used to perform several pulmonary function tests (PFTs). The sensor uses a disposable mouthpiece and differential pressure sensor to accurately report the flow rate (L/s), total flow (L), and max flow rate (L/s) for both inhalation and exhalation. Depending on the test being performed, students can set up a graph to display a volume-time curve or flow-volume loop. Two of the most common tests are the forced vital capacity (FVC) and forced expiratory volume in 1 second (FEV1) which can be used to calculate their FVC/FEV1 ratio. This ratio is often used to test for respiratory disorders such as asthma. To find out how to collect and analyze data for the FVC and FEV1 tests watch these quick tutorials by clicking on the links below.

Please remember that this equipment should not be used for medical diagnosis.

Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)