Calcium ISE (Ca2+)

Product Code: PS-3518


This ISE connects to the Wireless pH Sensor and allows students to measure the concentration of Calcium ions in aqueous solutions.

This ISE utilizes a standard PVC membrane. As with all ISE implementing this design, the lifespan of the membrane is limited. For this reason, we offer replacement sensor modules (PVC matrix sensor type) which allow you to periodically replace the module, rather than the whole electrode.

PASCO Ion Selective Electrodes are industrial-quality probes that give excellent results when properly used. Operation of these Ion Selective Electrodes assumes training in the safe handling of flammable, caustic and corrosive chemicals and a working knowledge of serial dilution and calibration procedures. For this reason, they are not recommended for use by elementary or middle school students.

What’s Included

  • 1x 2m cable


Range 1 to 40,000 ppm or mg/L
pH range 2-8
Electrode slope 26 ± 2 mV/ decade
Interfering ions Pb2+, Hg2+, Si2+, Fe2+, Cu2+, Ni2+, NH3, Na+, Li+, Tris+, K+, Ba2+, Zn2+, Mg2+
Electrode type PVC Membrane

Supporting Documents

Calcium ISE Probe Manual English 276.88 KB
Safety Sheets
Calcium ISE – Safety Data Sheet English 264.63 KB
Calcium Reference Fill Solution – Safety Data Sheet English 246.87 KB
Calcium Standard Solution – Safety Data Sheet English 225.66 KB