Measure the forces at any location in structures you build with any PASCO Structures System–this set provides 4 Load Cells and a Load Cell Amplifier to get you started.
Any I-beam in a structure can be substituted for two smaller I-beams connected to a Load Cell to measure forces at that location. Each amplifier can accept 6 Load Cells and if additional cells are needed, multiple amplifiers can be connected to a single computer through a PASCO interface.
Both Load Cell Amplifier and Load Cells are also available separately.
- Insert Load Cells anywhere in Structures Sets
- Measure tension and compression forces
- Each Amplifier accepts up to 6 Load Cells
How It Works
A load cell can be inserted into the design by replacing one beam with a load cell connected to two shorter beams. There is no need to completely disassemble the structure to add instrumentation.
- Load Cell Amplifier
- 100 N Load Cells (4)
- Instruction Manual
|Load Cell Ports||
|Maximum Sample Rate||
|Differential input voltage for any load cell||