Digital Storage Oscilloscope (100 MHz)

Product Code: SB-9621A

Description

This 2-channel oscilloscope is designed to meet educational demands. With fast waveform process capability, more advanced triggering functions, and lightweight design, this oscilloscope is an excellent replacement for an analog scope.

Via the USB Device port, the user can easily build a remote control program to manipulate the machine, storing data directly into a flash drive for further analysis.

Several acquisition modes and 27 auto measurement functions help the user accurately measure waveform properties.

A total of 15 waveforms can be saved into the internal memory for later recall and display, and two saved reference waveforms plus two live waveforms can be shown on the screen at the same time for comparison.


Product Specifications

Vertical
SB-9620
  • DC to 60 MHz (-3dB)
SB-9621
  • DC to 100 MHz (-3dB)
Channels
  • 2
Rise time
  • <5.8 ns Approx (SB-9620), <3.5 ns Approx. (SB-9621)
Sensitivity
  • 2 mV/div to 10 V/div (1-2-5 increments)
Accuracy
  • (3% x IReadoutI + 0.1 div + 1mV
Input Coupling
  • AC, DC & Ground
Input Impedence
  • 1 MΩ  2%
Polarity
  • Normal & Invert
Maximum Input
  • 300V (DC+AC peak), CATII
Waveform Signal Process
  • +, -, X, FFT, FFTrms
Offset Range
  • 2 mV/div to 50 mV/div: ±0.4V; 100 mV/div to 500 mV/div: ±4V; 1 V/div to 5 V/div ±40V
Bandwidth Limit
  • 20 MHz (-3dB)
Trigger
Sources
  • CH1, CH2, Line, EXT
Modes
  • AUTO, NORMAL, SINGLE, TV, Edge, Pulse width
Coupling
  • AC, DC, LF rej., HF rej., Noise rej.
Sensitivity
  • DC to 25 MHz: Approx. 0.5 div or 5 mV; 25 MHz to 60/100/150 MHz: Approx. 1.5 div or 15 mV
External Trigger
Range
  • ±15 V
Sensitivity
  • DC to 25 MHz: ~ 50 mV; 25 MHz to 60/100 MHz: ~100 mV
Input Impedence
  • 1 MΩ  ± 2%
Maximum Input
  • 300 V (DC, AC, peak), CATII
Horizontal
Range
  • 1 ns/div to 50 s/div (1-2-5 increments); ROLL: 250 ms/div to 50 x/div
Modes
  • MAIN, WINDOW, WINDOW ZOOM, ROLL, X-Y
Accuracy
  • ±0.01%
Pre-Trigger
  • 10 div maximum
Post-Trigger
  • 1000 div
X-Y Mode
X-Axis Input
  • Channel 1
Y-Axis Input
  • Channel 2
Phase Shift
  • ±3º  at 100 kHz
Signal Acquisition
Real-Time Sample Rate
  • 1 GSa/s maximum
Equivalent Sample Rate
  • 25 GSa/s maximum
Vertical Resolution
  • 8 Bits
Record Length
  • 2 Mega Points maximum
Acquisition Mode
  • Normal, Peak Detect, Average
Peak Detection
  • 10 ns (500 ns/div to 50 ns/div)
Average
  • 2, 4, 8, 16, 32, 64, 128, 256
Cursors and Measurements
Voltage Measurement
  • Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise, Pre-shoot/Overshoot, Fall Pre-shoot/Overshoot
Time Measurement
  • Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Delay Measurement
  •  Eight different delay measurements
Cursors Measurement
  • Voltage difference between cursors (ΔV)
  • Time difference between cursors (ΔT)
Auto Counter
  • Resolution: 6 digits
Accuracy
  • 2%
Signal Source
  • All available trigger sources except the Video trigger mode
Adjustable Probe Compensation Signal
Frequency Range
  • 1 kHz to 100 kHz, adjustable 1 kHz/STEP
Duty Cycle Range
  • 5% to 95% adjustable, 5%/STEP
Control Panel Function
Autoset
  • Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically
Save Setup
  • 15 sets of measurement conditions
Save Waveform
  • 15 sets of waveform
Display
TFT LCD Type
  • 5.6 inch
Display Resolution
  • 234 (Vertically) x 320 (Horizontally) Dots
Display Graticule
  • 8 x 10 divisions
Display Brightness
  • Adjustable
Interface
USB Device
  • USB 1.1 & 2.0 full speed compatible (printers and flash disk not supported)
SD Card Slot
  • Image (BMP) waveform data (CSV) and setup (SET)
Power Source
Line Voltage Range
  • AC 100V to 240V, 48 Hz to 63 Hz, Auto selection
Miscellaneous
Multi-Language Menu
  • Available
Online Help
  • Available
Dimensions & Mass
Dimensions
  • 31 cm (W) x 14 cm (H) x 14 cm (D)
Mass
  • Approximately 2.5 kg