Skip to main content

The SPARK LX Air Datalogger is PASCO’s slimmed-down all-in-one device for data logging, display, and analysis.

Designed for a wet-lab environment, the LX Air is portable, durable, and splash-proof.

The LX Air can connect to up to 5 Wireless Sensors at once. It is also compatible with the SPARKlink® Air and the 550 Universal Interface.

Built for Student Use

  • Portable
  • Shock-absorbing case
  • 8” Color Capacitive Touchscreen (1280 x 800 pixels)
  • 2.0 GHz Application Processor, 2.0 GB RAM, 32 GB Memory

The units come ready-to-use with pre-installed data logging software, including SPARKvue®, Chemvue®, Spectrometry, and MatchGraph!

SPARK LX Bundles – Save up to 45%!

SPARK LX Specifications


Application Processor (CPU) 2.0 GHz Quad Core
Screen 8.00″ color capacitive touchscreen, 1280 x 800 px; 16:10 aspect ratio
Memory 32GB eMMC Flash, 2.0 GB DDR4 RAM
WiFi 802.11a/b/g/n/ac
Bluetooth 5.0
Connectivity Wifi, Bluetooth®, USB-C
Battery LiPo battery up to 8 hours between charges

Battery 

Battery Type Rechargeable LiPo (8,000 mAh)
Battery Life* ² ³ < 8.0 hours
Battery Life when screen off in “sleep” mode 24 hours
Battery Life when powered down or completely turned off 30 days
Time to fully charge 4 hours

1 Minimum # of data points with all measurements enabled, actual results depend on enabled measurements.

2 Continuous use in a connected state until battery failure, actual results will depend on sample rate, active measurements, and battery condition.

3 Logging until battery failure, actual results will depend on sample rate, active measurements, and battery condition.

* Normal classroom use is the sensor in active use for 20min/lab for 120 lab periods/yr.

SHARE YOUR CART